Product training | Competent use of the 4cost software

Get the most out of your 4cost software

For each of our 4cost costing software applications, we offer new and experienced users a comprehensive range of training courses. In a practice-oriented way, we teach you all the competences and skills you need to successfully use the 4cost calculation software in your company. Both online and on-site.

The advantages of 4cost product training at a glance

All our trainers are experienced value engineers
Intensifies your knowledge through individual, practical exercises with direct reference to company-specific problems
All 4cost training courses are modular in structure and can be individually adapted to your needs

We provide all participants with comprehensive training documents as reference material and to consolidate the acquired knowledge
As proof of knowledge, all participants receive a certificate at the end of a training course if they have successfully completed it
We offer all product training courses in German and English

Get yourself and your team trained

Are you interested in one of our product training courses? We would be happy to inform you about prices, dates and general conditions.

Request a product training

Our international customers report on their success with 4cost

“The comparison of providers revealed, that 4cost achieved the highest score. We were particularly convinced by the fact that 4cost’s solutions can be used for all commodities, regardless of technology. Equally decisive was the enormous speed with which cost estimates are possible despite limited information.”

Christian Ahrens

Team leader of the Value Engineering department, Rheinmetall Landsysteme GmbH

“A major advantage of the 4cost software is the seamless interlocking of the two costing approaches, top-down and bottom-up. This appeals to a wide variety of cost estimators and ensures a consistent cost view without losing information across all project phases.”

Alexander Nordmeyer

Value Engineer, Rheinmetall Landsysteme GmbH

“The departments experience made with the costing software from 4cost are very positive and associated with high savings. By increasing transparency in the cost structures, a monetary benefit in the seven-digit range can already be recorded. We have made the right decision in our selection process and are very happy about our success!”

Manfred Billes

Department head of the EEPC team, MAN

“From small start-ups to large corporations, costs must be constantly kept in view and controlled, especially in these difficult times. This succeeds very well with the 4cost software and I believe we can generate real added value for our companies.”

Sarah Wörz

Officer, Digitalisierungszentrum Ostwürttemberg

“The consistent calculation method of the 4cost tools convinced us right from the start. Very quickly we realised, that this methodology supports our needs in calculation, value engineering, purchasing and engineering excellently.”

Frank Hoffmann

Head of Supply Chain Management, Rheinmetall Electronics GmbH

“With 4cost's modern parametric calculation models it is possible to estimate good and valid costs already in phases with limited detail of knowledge. In order to establish this, we not only made use of 4cost's software solutions, but also using their expertise in value engineering.”

Senior staff member

Purchasing department, Rolls-Royce

“The 4cost-aces interface is user-friendly and logically structured, especially when compared to other cost estimation tools. This makes it easier to use the tool even for occasional users.”

Thomas Fiedler

Head of Cost Architecture A30X, Future Projects & Costing Performance, Airbus Deutschland

“We decided on 4cost because we see a significant added value for our calculation and value analysis in a consistent approach from quick cost estimates to detailed calculations. We focus now on the main cost drivers and identify areas with the greatest potential for cost optimization.”

Werner Seifried

Technical Director, Liebherr-Hydraulikbagger GmbH (2009)

“With 4cost we have a partner with whom we are implementing our objective of a long-term partnership in the areas of cost estimation, value analysis and cost structure analysis. We will continue to establish 4cost's solutions and use them even more intensively in the future, because the added value is obvious.”

Werner Seifried

Technical Director, Liebherr-Hydraulikbagger GmbH (2009)

“With the parametric cost estimate from 4cost-aces, we are fast and reliably in estimating new assemblies and examine scenarios.”

“With the 4cost-structure calculation tool, we are tracking target costs and manage our projects, including history and versioning.”

Peter Schmidt

Value analysis department, Liebherr-Hydraulikbagger GmbH (2009)

“The partnership-based cooperation with 4cost enables us to arrive at rapid cost estimates for our projects both in-house and directly at our customers site. I would not have expected a calculation of the costs at such an early stage in the product development process with such depth, consideration of variants and meaningfulness of the answers!”

Matthias Miesbeck

Project engineer, HOLZER Firmengruppe

“We were enthusiastic about the speed and cost transparency during the 4cost workshops. We used the results from the workshops as a base for our business case analysis. We froze the cost target as cost reference for the subsequent development process and continuously referenced and checked on them.”

Hinrik Weber

Head of the optoelectronics business unit, Pepperl+Fuchs

“The speed in which the costs are determined is impressive with this method. Elaborate work plans do not have to be predefined and evaluated, because the parametric approach of 4cost-aces is based on material and value-added approaches.”

Ernst Tabel

Project manager, Pepperl+Fuchs

“With 4cost-aces we are able to arrive at valid cost statements very quickly. Compared to a bottom-up calculation that typically takes several weeks, we only need one to three days for the first cost assessment.”

Gregor Schwab

Head of Orders & Offers, Production, EADS Defence & Security

“In addition to the drastic time advantage of this costing method, the workshops have another effect that should not be underestimated: all participants agree on a common costing basis during the meetings and evaluate it in detail. The acceptance of the calculated cost values is very high due to the involvement of all participants.”

Gregor Schwab

Head of Orders & Offers, Production, EADS Defence & Security

“The workshop with the 4cost team was convincing both in terms of methodology and result. We were getting an idea of how the parametric approach of the 4cost-aces costing software works. Many new possibilities could now be approached in our daily work.”

Stefan Buchwald

Strategic buyer, BARD Engineering

“The 4cost solutions enable us to become an extended workbench to the costing departments of companies in our region.”

Peter Schmidt

Head, Digitalisierungszentrum Ostwürttemberg

“The early breakdown of product and project costs with 4cost-aces not only offers us a high level of cost transparency, but in particular shows us optimisation potential for development and design. On the one hand, we are thus able to forecast future manufacturing costs in the case of design changes and on the other hand, to independently check manufacturing costs of already existing designs.”

Martin Klotz

Product Cost Engineer, Liebherr-Werk Biberach GmbH

Read our client testimonials

Our training courses

Depending on your personal experience level we offer different training formats.

Basic training

In our basic training, first-time users receive an introduction to the basic functionality of the respective 4cost software modules. First, we familiarise you with the user interface of the costing application and teach you how to create projects and set up cost structures. Afterwards, we provide you with practical examples of all the necessary knowledge about the various application. The comprehensive modelling options offered by the software are also thought and shown.

Advanced training

The advanced training courses are aimed to experienced users of the 4cost software who would like to consolidate and deepen the knowledge and skills they have acquired up to this point. In this training format, special topics are considered and trained. You also have the opportunity to bring in examples from your own working environment and work with them.

Release training

At regular intervals, we familiarise our existing customers with the latest functions of our software applications free of charge. We explain how to use these new features and apply them in practice.

Administrator training

Our administrator training courses enable your specialists to carry out administrative tasks such as data maintenance, configuration or customer-specific settings.